Download and Flash OxygenOS On OnePlus 3 (Stock ROM)

Flashing OxygenOS stock rom / firmware on OnePlus 3 is very easy: just like installing a downloaded APK file on your Android device :P. The ROM to download from the link below is OxygenOS 3.1.2 and is meant only for OnePlus 3. Flashing on any other OnePlus device will cause a brick.

Download the ROM from link below and follow the flashing instructions in this post to learn how to flash. If you are using a custom recovery like TWRP, you can also flash OxygenOS without issues. But I strongly recommend that you flash over Oxygen Recovery. Download Oxygen Recovery for OnePlus 3 here.

Downloads

• OxygenOS 3.1.2 - Download

Details:Device: OnePlus 3
Version: 3.1.2
Update time: 2016-06-06
File size: 1.2 GB

How to flash OxygenOS on OnePlus 3

• Download OxygenOS from above link. Make sure you have properly setup ADB on your computer. http://ikkemunandar.blogspot.com /2016/04/universal-adb-and-fastboot-driver.html" target="_blank">Learn more

• For convenience sake, you should consider renaming OnePlus3Oxygen_16_OTA_007_all_1606062247_8f031965d7db4420.zip to oxygenos.zip. To shorten text length and prevent errors when using adb sideload command.

• Power off your phone and reboot into recovery mode. To do this, shut down your device and turn it back on while holding the Power and Volume Down buttons simultaneously.

• From recovery options, choose Install from USB, tap OK to confirm. A screen with You are in sideload mode will be displayed.

• Connect your device to PC/Mac, run following command in command prompt / terminal

 Windows: 

adb sideload <filename>

 Mac/Linux: 

./adb sideload <filename>

Example: adb sideload oxygenos.zip 

• Now wait for the update / firmware flashing process to complete. The device should reboot automatically on completion. Done.

You have now successfully flashed stock OxygenOS on your OnePlus 3 smartphone.

If you got any questions or any comment, please post in comments section below. Don't forget to share this post with friends.